How about a trade thread for reloading components.

[Festus]

Not a lot in the last couple weeks up until the last 3 days with Remingtons coming into the food chain, this will drastically change things going forward with their mass producing capabilities so I look to see a lot more popping up in the next few weeks.

I hope so. I’m running a little low!

[Festus]

https://www.ldbsupply.com/CCI-No-500...unds_p_58.html

OUCH

You got that right!

[Bucknaked]

https://www.ldbsupply.com/CCI-No-500...unds_p_58.html

OUCH

That’s absolutely nuts!

[jaime1982]

You got that right!

That’s absolutely nuts!

Yes but still cheaper than gunbroker lol. Sadly

Sent from my SM-G991U using Tapatalk

[RifleBowPistol]

I'm looking for about 5000 5.56 cases to form some 300blackout on my down time.

Houston area.

Sent from my SM-G991U using Tapatalk

Back before all this crazy crap, I had about 800 pieces of 44 Mag. brass I could not give away and probably about 5000 pieces of 5.56 brass, I could not give away. I also had, still have about 3000 pieces of 223 brass. I forgot what else I had. All of the 44 Mag. and the 5.56 went to the scrapper after about two years of trying to sell them for very close to free. Now the prices I see on 44 Mag. brass, is nuts.

[RifleBowPistol]

RL15 is a ghost, if I were you I’d be finding another powder unless you don’t use much and in that case you can probably find a pound or two. Large quantities not so much, I search powders 24/7 literally and I havnt seen any since early last year show up.

Very true, I have looked for about ten months, have not found any, any listed is sold out before I find it.

[muzzlebrake]

https://www.ldbsupply.com/CCI-No-500...unds_p_58.html

OUCH

Get em while you can. That's cheep compared to these rip offs https://fedarm.com/product/primers-boxer-sp/

[Kong]

Any particular bullets you guys are looking for? I know powders and primers but I’ll gladly list what I find if I have an idea as to what some of them are. Calibers and bullet types? Lots of ELDX’s coming up right now if anyone uses those. I snagged 12 more box’s of 143’s this morning so if anyone needs anything post the info on them.

[trophy8]

Any particular bullets you guys are looking for? I know powders and primers but I’ll gladly list what I find if I have an idea as to what some of them are. Calibers and bullet types? Lots of ELDX’s coming up right now if anyone uses those. I snagged 12 more box’s of 143’s this morning so if anyone needs anything post the info on them.

Standard accubonds. 140 grain 6.5mm and 180 grain 30 cal

[db@100]

How about Nosler ballistic tip 7mm 140 grain "Nosler 28140" and Nosler ballistic tip .308 168 grain "Nosler 30168"

[txagyotebuster]

How about Nosler ballistic tip 7mm 140 grain "Nosler 28140" and Nosler ballistic tip .308 168 grain "Nosler 30168"

I am looking for 7mm 140 ballistic tips as well. 120s would work too

[Kong]

Just tossing this one out thr in case anyone’s desperate

https://www.midsouthshooterssupply.com/item/000074330t/6halfmm-point264-diameter-130-grain-tgk-game-changer-polymer-tipped-spitzer-boat-tail-50-count

If you will keep an eye on this place they sell a ton of bullets and they get in large amounts of popular stuff daily.

https://www.bluecollarreloading.com/collections/nosler

[db@100]

Kong, thanks for all you do on these posts. One of these days I catch a place that hasn't sold out by the time I get there.

[Matt_C]

Appreciation from me to Reuben. I haven't found my primers yet or my N150 but I appreciate the heads up anyway.

Matt

[jaime1982]

Was bidding on these last night just to see. They went for 190/1k plus tax and shipping. Kinda kills the deal for me IMO.