Glock Help (trigger)

[rrebel83]

I am looking to do the Ghost Ultimate Drop in trigger plate on my G31 anybody have experience with these products can give me some pointers. I was looking to do the trigger plate and spring. Pretty cheap way to get the trigger where I want it around 3lbs with no play. Any safety issues after install? Any info will be helpful.

Also a Magwell you would suggest.

[Tuffbroadhead]

I have the Ghost Rocket 3lb disconnect..

CurtinTex shot mine tried to buy my pistol!! I think he liked it alot..

Zero issue and no safety probelms.

But be aware ther are two types, direct drop it and one that has to be hand fitted and hand filed....I love the hand filed one, perfect connection a zero slack, very little reset.

[Shane]

I was thinking about putting one of the Ghost trigger kits in my 19. Still safe for carry?

[Mike D]

You will not end up with a 3# trigger. It will make it lighter, but it will not be 3#.

[Tuffbroadhead]

You will not end up with a 3# trigger. It will make it lighter, but it will not be 3#.

This is correct, without changing out the spring..

But I will tell you the recoil from my 19 almost resets the trigger..

Perfectly safe Shane..

[Dallascowboys]

What about the drop in kit anyone use one of those

[J.B.]

I have a Ghost Rocket in my G22. Works awesome. Also do the 0.25 cent trigger polish job. It helps some too

[Dallascowboys]

This might be a dumb question but what does the lighter trigger help with besides the pull of course lol

[gmengers]

I think KingranchKiller put one in his.

[Mike D]

This is correct, without changing out the spring..

But I will tell you the recoil from my 19 almost resets the trigger..

Perfectly safe Shane..

I've got a couple of Ghost connectors and springs in my Glocks and they all run a shade over 4#. I'm sure I don't run near as many rounds through mine but that's what I am seeing.

[Tuffbroadhead]

This might be a dumb question but what does the lighter trigger help with besides the pull of course lol

It is not designed to lighten the trigger, but it is designed to almost eliminate the trigger over travel.

Which in turn makes your trigger reset distance shorter..

[Tuffbroadhead]

I've got a couple of Ghost connectors and springs in my Glocks and they all run a shade over 4#. I'm sure I don't run near as many rounds through mine but that's what I am seeing.

Thats what I have heard....I did not put a spring in mine but rather just replaced the trigger bar...love it that way.

[bboswell]

Good info

[Shane]

Cool. Thanks.

[Mike D]

Thats what I have heard....I did not put a spring in mine but rather just replaced the trigger bar...love it that way.

Hmmmm, what does changing the trigger bar do?