For you guys more savy than me in long range hunting with the boom stick. Thinking about pulling the trigger on Leupold VX-6 and trying to decide on the reticle. Two options are the TMOA and the duplex firedot. Both are illuminated. In hunting situations with roughly 600 yard max, do you think the extra $200 for the TMOA reticle to adjust for windage would be useful? My first thought is no as trying to calculate windage while in the moment to properly adjust on the scope would be futile. But dropping a decent chunk of $ on a scope, I dont want any regrets. Thoughts?
Announcement
Collapse
No announcement yet.
Scope Reticle Question
Collapse
X
-
Originally posted by solocam_aggie View PostMy first thought is no as trying to calculate windage while in the moment to properly adjust on the scope would be futile. But dropping a decent chunk of $ on a scope, I dont want any regrets. Thoughts?
- Likes 2
Comment
-
If you are going to be shooting out to 600 yards, even in light wind situations, you are going to have to compensate for windage. This can be done either with the turret, the proper reticle, or estimate the hold off. I would not want to rely on the latter with a trophy animal in my sights. Of course to compensate accurately for windage (or elevation for that matter) you will need to know the drift at your set of conditions for your particular load. One way to do this is with a ballistic chart for your load and conditions and the use of either a turret or MOA (or Mil) reticle. So, out of your stated choices, I would go with the TMOA model.
Comment
-
If set on VX-6 then TMOA reticle all day long. It's amazing what a bullet can do after 400yds on medium/strong wind. It can be the difference between a liver/gut shot or back of lungs. The windage marks on TMOA will give you a more precise aiming point instead of just floating a reticle off the intended aiming point.
- Likes 1
Comment
-
I went with the firedot duplex on my VX6. For sure find the ammo it likes, get the required ACCURATE DATA(not velocity off the box) and get the CDS turret for dialing elevation. Even if you get the TMOA reticle, the VX6 is a second focal plane scope. So your holds are only accurate at one magnification setting(usually max magnification). So, this can cause issues trying to use the reticle for holds.
That’s why I got the duplex reticle, I’m not doing elevation holds with a second focal scope.
Get accurate data, confirm it out to 5-600yds, get the CDS dial. Windage either takes some skill, or having an app to give you that hold. Dial it or guess it best you can. It’s what makes or breaks shooters…. It breaks me. Haha.
- Likes 1
Comment
-
Forget the CDS turret. Change your ammunition and you are back to square one. Dial your elevation.
First focal plane is the best for long range. Depending on your eyesight crosshairs can be thin at lower power. Illuminated reticle helps in this case. Second focal planes are good. But you usually need to be on the scopes highest power to use the reticle for aiming.
Busy reticle is a myth. If you have a modicum of intelligence you won't have a problem. If you don't stay away. Having a specific aiming point will always yield better results.
Mils or MOA doesn't really matter. Mils are quicker. MOA are more precise at long distance. Either will work as it's a personal preference.
- Likes 2
Comment
-
Originally posted by solocam_aggie View PostAppreciate the comments. To be clear, I'll definitely be accounting for wind, just trying to decide how precise to be.
Dang it M16, thanks for throwing a wrench in my thoughts on this! You have me looking hard at that NF NX8 now.
Comment
Comment