I have a Judge feeder that is about 6 or 7 years old and recently it has started to "stick" when it is supposed to run. I can go out and press the test button and it does nothing. If I use a stick to manually rotate the feeder plate then run the test again, the spinner plate will throw corn. Once that happens, it seems to spin at the regular speed and throw corn about the same as in the past. The battery shows a full charge but, interestingly, reports 6V even though the battery is 12v as is the motor. It has been this way a very long time. It is a "foreverlast" timer that replaced my second failed "the timer".
Before I shovel out corn and dig in there, what's the most likely culprit in your opinion?
Before I shovel out corn and dig in there, what's the most likely culprit in your opinion?
Comment