Qad felt alternative

[kd350]

Anybody use anything other than the replacement felt? I’m tired of burning through them so fast, this is my third set in a little over a year. Just looking for something that will last

[kingranch]

Moleskin?

I had similar problems w my qad felt and it squeaky as hell!

[kd350]

Moleskin?

I had similar problems w my qad felt and it squeaky as hell!

Moleskin was my first thought, but was looking for other ideas as well.

[redfishted]

I buy this from Amazon.

PTFE Fabric Tape, Teflon Tape for Vacuum Sealer Machine, Hand Impulse Sealers Insulation Wear-resistant PTFE Coated Fiberglass

[ultrastealth]

Total peep sells premade stuff that fits like a glove and is really quiet

[kd350]

Total peep sells premade stuff that fits like a glove and is really quiet

Is it more durable than the qad stuff?

[SRK14]

I’m in for the responses on this as well. Qad felt is **** poor.

[redfishted]

I buy this from Amazon.

PTFE Fabric Tape, Teflon Tape for Vacuum Sealer Machine, Hand Impulse Sealers Insulation Wear-resistant PTFE Coated Fiberglass

I’m telling you save yourself the trouble, this stuff is inexpensive and once you try it you will never use anything else.

[kd350]

I buy this from Amazon.

PTFE Fabric Tape, Teflon Tape for Vacuum Sealer Machine, Hand Impulse Sealers Insulation Wear-resistant PTFE Coated Fiberglass

I’m telling you save yourself the trouble, this stuff is inexpensive and once you try it you will never use anything else.

Where all does this go? In the trough for sure, but what about the arms? Or just cut it to shape?

[redfishted]

Where all does this go? In the trough for sure, but what about the arms? Or just cut it to shape?

Trough and prongs, or you can just put it on the trough and the felt on the sides.
One roll will last the rest of your life.

[kd350]

Trough and prongs, or you can just put it on the trough and the felt on the sides.
One roll will last the rest of your life.

3/4” wide or 1/2” lots of options on Amazon

[redfishted]

I get the 1/2 and trim it.

[kd350]

I get the 1/2 and trim it.

Thank you. Was thinking tape in the trough and heat shrink tubing on the arms

[jlp04c]

Extreme velcro only use the softer loop side. Trim as necessary. Works on the shelves as well too

[HeyMikey]

Thank you. Was thinking tape in the trough and heat shrink tubing on the arms

Sounds like a good plan, right there.