Want to try some single bevels but also want to be able to resharpen them. The KME kit looks EZ enough and I could also use on my double bevels. Anyone ever use it, or have another kit at same price point that EZ to use?
Announcement
Collapse
No announcement yet.
Single Bevel Broadhead Sharpening
Collapse
X
-
I have both
Buy the Stay Sharp one and try it out, it will last plenty long enough for you to get your money's worth
If you decide you are going to stick with it then you can buy the KME
Not sure what broadhead you are shooting but if it is something with anything but a straight cutting edge (massai, kudu, helix, etc) you will be wasting money
Comment
-
Originally posted by RUNNING BEAR View PostThanks for the info.
Any thoughts on 4 blade single bevel heads? Iron Will and DRT both have SB heads with a bleeder option. This seems odd to me. Anyone have experience with that.
It’s a pretty silly notion of you get down to the brass tacks of it. People shoot a SB edge because they either:
A) want increased penetration
Or
B) want to have a better chance of breaching bone
Whatever the motivation the additional blades make the head less efficient and imo defeat the purpose of shooting a SB head in the first place. You may not see a huge difference in a two blade SB vs a SB with bleeders when it comes to soft tissue penetration but breaking bone the head with no bleeders will outperform and even more so on heavier bone mass. Aside from that in most cases you will be weakening the ferrule when it is machined accept bleeders. Just remember that any notching or cutting on the ferrule is essentially creating stress risers on the ferrule itself and by nature these can be structural failure points under the right conditions.
[emoji1662]
Comment
Comment