So I went to the TAC San Antonio and broke 7 of my new arrows and lost 2. I am looking at building some high FOC arrows to try out. I have always been an Easton guy with either the FMJ's or the Axis, but I am not married to Easton. Help me build the perfect arrow. This arrow will be used primarily for hunting. It should be capable of taking Elk. I will most likely be shooting Iron Will, QAD Exxodous, or RMS Cutthroat broadheads. My previous arrows were Axis 260, 30.5 carbon to carbon, standard 16 grain insert, 125 head, 3 blaser vanes, 4" wrap, nocturnal x nock 20 grains. Terrible FOC and I cut them too long, but they flew and grouped great out to 95 yards.
My specs are:
Hoyt Defiant 34
70 lb limbs maxed out
29.5 draw length
What I am looking for in an arrow:
Strength and Rigidity
FOC
Micro Diameter ???
A minimum of .003 straightness
Lighted nock
The ability to clear my sight without fletching contact out to at least 100 yards
My specs are:
Hoyt Defiant 34
70 lb limbs maxed out
29.5 draw length
What I am looking for in an arrow:
Strength and Rigidity
FOC
Micro Diameter ???
A minimum of .003 straightness
Lighted nock
The ability to clear my sight without fletching contact out to at least 100 yards
Comment