Tuning help - I'm lost

[TxHunter06]

No offense, but my experience has been that no two brands tune the exact same. For that matter, no dozen shafts all tune the exact same. Most of the time there are slight differences that can cause erratic flight. If you are not currently shooting a homogenous setup, this could be the root of your problem. Fps and mechanicals may mask bad arrow flight, but you will suffer with penetration.


I say all of this because I have experienced it first hand. A well tuned setup is worth it's salt.

X2 agreed!

[rocky]

The Assassin is very forgiving for cam timing issues, but I set cams equal at brace.
In other words. pick a spot on the cams and set them alike (at brace) in relation to the limbs as long as A2A, brace, and poundage are close to spec.
Set arrow nock level, straight out the front.
All this being said, I think you have a fletching issue.