Broad heads

[TRam]

I was wondering what Broad head to buy for a 300 pound hog. Any recommendations

[Texantax]

Slick trick mags

[Mr. Whiskers]

Slick trick mags

Like Jason said

[enewman]

Any cut on contact will work.

[TICK MAGNET]

I would use a cheap cut on contact. If you don't hit him just right, chances are you won't get it back.

[Fla Hunter]

Slick trick mags

^This

[gneimeth]

QAD exodus - they r deadly / can't believe more people don't use them...

[Brinkley]

Magnus. Try the new black hornet. It is awesome!!!

[Limbwalker]

A razor sharp cut on contact head. Lots to choose from.

[bphillips]

Depends on your setup. I wouldn't hesitate to use a 1 3/8" grim reaper or rage hypodermic myself. Fixed heads I like exodus, ramcats, or stingers but there are tons that would work.

[TEXAS 10PT]

Big heads like these and watch them go down

[Nocturnal85]

Any head will work long as you put it through ribs not the shield. If worried just about any fix blade will do it. Favorites are slick tricks, muzzy, ramcats

[popup_menace]

Slick trick viper tricks. Basically a hybrid between COC and chisel tip.

[enewman]

I hunt hogs all the time. One thing we haven't talked about is arrow weight. Yes a 400 gn arrow will kill this 300 lb hog. But we are talking about a 300 lb hog. You need to look at the whole picture if building a arrow for this hog. A efoc arrow is best that's a 19% foc or more. But a lot of people don't want to spend the money on 200 plus gn heads. Not common at all at most stores. Nor is buying 50 to 100 gn inserts.

So this brings you back to using a heavy arrow. This is my opinion If I was going to hunt a 300 lb hog. I would at a min have a 500 to 525 gn arrow. Then a good cut on contact head. I would not have to worry about the thick shield that he may have.

When I build arrows for a specific animal. I look at my options. And build my arrow for T.A.P.

[Hunter Todd]

Sharp ones.............