Fletching for single beveled BH?

[JWF]

I'm considering giving the DRT single beveled heads a try this year. I've done a little reading and am curious if I need to fletch for a right helical to make these heads fly correctly. I'm no bow tender, just do some reading and experimenting on my own. Thanks in advance.

[Pushbutton2]

I'm considering giving the DRT single beveled heads a try this year. I've done a little reading and am curious if I need to fletch for a right helical to make these heads fly correctly. I'm no bow tender, just do some reading and experimenting on my own. Thanks in advance.

I've always been told right bevel needs a right helical.

[muddyfuzzy]

Fletching for single beveled BH?

Fletch the offset or helical to match the bevel on the head. It won't have any bearing on flight but you don't want the head to become loose on impact. The rotational movement of a single bevel through bone and tissue is no joke.

[JWF]

So for optimum performance I need to fletch helical and not straight correct?

[Low Fence]

So for optimum performance I need to fletch helical and not straight correct?

correct, there is no reason for straight fletched in archery, dont know why its even offered

[Low Fence]

So for optimum performance I need to fletch helical and not straight correct?

correct, there is no reason for straight fletched in archery, dont know why its even offered

[JW]

So for optimum performance I need to fletch helical and not straight correct?

Straight doesn't belong on a double bevel head! And, What Mudfuzzy said.