Nocks won't stay on string??

[J.B.]

Anybody know a remedy to keep nocks from pulling off the string during draw?

I picked up some Nockturnal nocks and they pull off the string during my draw cycle.....

Can I get the nock area served to increase the string thickness?

[pblaetz]

Wrap the serving with dental floss.

[lbbf]

^^ This.

[Limbwalker]

Or just learn to re-serve your bowstring. It's not hard at all to do. Academy sells serving kits (by Bohning) that include a spacer for your string/cables.

You can lay a strand of serving under the wraps to build the diameter a little bit so it will fit your nocks.

[old killer]

Do you use a D-loop? That may solve the problem.

[Kokanee]

I've had Nockturnals and standard Easton G nocks "spread" after about ten shots. The material just couldn't withstand whatever forces they were subject too. Gave up on lighted nocks and switched to Easton's Injexion G nock and it solved the issue. Not sure what your setup is, but if they stuck good for awhile and then went South after a few shots, might look into it.

[PSD Ryan]

Do you use a D-loop? That may solve the problem.

Don't want to pinch the nock with a loop. It's better to re serve the string.