Announcement
Collapse
No announcement yet.
FOC increase
Collapse
X
-
Originally posted by Pushbutton2 View PostWell,
Just left the bow shop. My arrows are to short to shoot 2 blade broad head like a DRT or German Kinetic. Brian's concerned with shelf contact..
Comment
-
Originally posted by Pushbutton2 View PostWell,
Just left the bow shop. My arrows are to short to shoot 2 blade broad head like a DRT or German Kinetic. Brian's concerned with shelf contact..
I put a lot of thought into my finished arrow length so the 1-9/16" Land sharks would clear. Didn't want to do what Newman did and the length put the spine where it needed to be. The tip weight, cutting diameter and length was all taken into account when I built the 23%er.
Comment
-
Can we discuss FOC and as it relates to traditional archery?
I just bought a recurve. I'm shooting full length arrows. They're a gold tip 7595. It's a crested arrow. I'm shooting feathers. Running a standard GT insert with a 50 grain screw in weight behind the insert. And a 125 field tip for now.
My FOC is 15.789.
I'm presuming that everything we've discussed applies. But since my draw weight is less I need less spine?
Is 15% FOC adequate for a traditional bow?
Comment
-
Originally posted by Pushbutton2 View PostCan we discuss FOC and as it relates to traditional archery?
I just bought a recurve. I'm shooting full length arrows. They're a gold tip 7595. It's a crested arrow. I'm shooting feathers. Running a standard GT insert with a 50 grain screw in weight behind the insert. And a 125 field tip for now.
My FOC is 15.789.
I'm presuming that everything we've discussed applies. But since my draw weight is less I need less spine?
Is 15% FOC adequate for a traditional bow?
Lots of animals fall over grave yard dead from people who don't even know what FOC stands for. In the trad world, it is more about spine than FOC, which is still a by product of getting your spine right. You shoot on the front what ever it takes to make your arrows fly best, and FOC is what it is after that.
Comment
-
Pushbutton2: Lots of deer historically killed with that set up. However, research by Dr. Ed Ashby over decades, involving thousands of shots into game animals shows that higher FOC, like 19 percent, improves penetration -- especially if bone is hit. Further, among other factors, says total arrow weight needs to be at least 650 grains to breach bone. Also says, it basically seems that higher FOC to "ultra extreme" percentages penetrates even better. Reports can be found at Alaska Bowhunting Supply's website among many others. Point of all the heavy arrow building is to improve lethality when things don't go right. A perfect shot leaving the bow can become problematic if the animal moves while the arrow's in flight.Last edited by tradtiger; 06-08-2015, 10:46 AM.
Comment
-
Originally posted by tradtiger View PostPushbutton2: Lots of deer historically killed with that set up. However, research by Dr. Ed Ashby over decades, involving thousands of shots into game animals shows that higher FOC, like 19 percent, improves penetration -- especially if bone is hit. Further, among other factors, says total arrow weight needs to be at least 650 grains to breach bone. Also says, it basically seems that higher FOC to "ultra extreme" percentages penetrates even better. Reports can be found at Alaska Bowhunting Supply's website among many others. Point of all the heavy arrow building is to improve lethality when things don't go right. A perfect shot leaving the bow can become problematic if the animal moves while the arrow's in flight.
:thumbup:
Comment
-
This is a really good thread to learn from. I am just getting into bow hunting and had no idea about FOC. I thought anyone could go into Cabelas and buy arrows ready to go. The bow I am shooting is 61 lbs and 28.5 draw length.
For my arrows I am thinking:
Cabelas Stalker shaft at 29" (9.3 gpi ) 340 spine
Easton 75 brass inserts
VPA Terminator 100 gr heads
Blazer vanes standard nocks
With that set up my arrow (based on calculator) weighs 506 grs and has an FOC of 14.7%.
Would it be worth bumping up to 125 broad head? FOC would go up to 16.4% and weight up to 531.
Comment
-
Originally posted by Gone to Texas View PostThis is a really good thread to learn from. I am just getting into bow hunting and had no idea about FOC. I thought anyone could go into Cabelas and buy arrows ready to go. The bow I am shooting is 61 lbs and 28.5 draw length.
For my arrows I am thinking:
Cabelas Stalker shaft at 29" (9.3 gpi ) 340 spine
Easton 75 brass inserts
VPA Terminator 100 gr heads
Blazer vanes standard nocks
With that set up my arrow (based on calculator) weighs 506 grs and has an FOC of 14.7%.
Would it be worth bumping up to 125 broad head? FOC would go up to 16.4% and weight up to 531.
Comment
-
Originally posted by Gone to Texas View PostThis is a really good thread to learn from. I am just getting into bow hunting and had no idea about FOC. I thought anyone could go into Cabelas and buy arrows ready to go. The bow I am shooting is 61 lbs and 28.5 draw length.
For my arrows I am thinking:
Cabelas Stalker shaft at 29" (9.3 gpi ) 340 spine
Easton 75 brass inserts
VPA Terminator 100 gr heads
Blazer vanes standard nocks
With that set up my arrow (based on calculator) weighs 506 grs and has an FOC of 14.7%.
Would it be worth bumping up to 125 broad head? FOC would go up to 16.4% and weight up to 531.
Comment
-
Got some new shafts, GT Kinetic Kaos 200 spine, new steel halfouts from Firenock and will be starting the tinkering and testing after I get thru studying and taking my Special Education certification test on the 21st! My teaching job or potential teaching job depends on if i pass this test or not. No playing until the test!
Comment
Comment