Announcement

Collapse
No announcement yet.

FOC increase

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by BTGuard View Post
    So the real FOC question, is should I bump my tip weight up to 150? What does that do to speed, would it mess up my spine? So many questions... This would put arrow weight to 485 or so, FOC to 16.5% or so, all out of a PSE Freak with drive cams.
    I will look into it for you, we had the spine pretty much perfect on your shaft. If you
    could shorten it up about 1/2" you would be good.

    Comment


      ASTM F2031-Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)

      Purpose

      3.1 This test method is intended to provide a stable industry standard by which benchmarks and comparisons can be made by manufacturers and consumers.


      3.2 This test method is intended to clarify and define arrow spine or stiffness as it pertains to the archery industry and sport.



      1. Scope




      1.1 This test method covers the formulation and designation of arrow spine measurement standards and nomenclature for arrow shafts.


      1.2 The English system of measurement, specifically inches of deflection, shall be used for all spine values expressed for a given arrow shaft.


      1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

      Comment


        Originally posted by muddyfuzzy View Post
        I will look into it for you, we had the spine pretty much perfect on your shaft. If you

        could shorten it up about 1/2" you would be good.

        I'll get to shoot today and fiddle with Dl, but it like old like the end of my arrow will be right around the Berger hole, so cutting more off is probably out if the question.

        Comment



          Not s great group, but I'm getting it sighted in and used to it. Shoots good, and the arrows were flying great

          Comment


            Originally posted by BTGuard View Post

            Not s great group, but I'm getting it sighted in and used to it. Shoots good, and the arrows were flying great
            What bow are u shooting ?

            Comment


              Originally posted by hoyt21 View Post
              What bow are u shooting ?
              He just go a PSE Freak

              Comment


                Originally posted by hoyt21 View Post
                What bow are u shooting ?

                Yep that's the first time I shot the freak, might head back tonight and get it dialed in. Won't be shooting past 20 for a while so I'll have plenty of time to get it right

                Comment


                  Originally posted by Pushbutton2 View Post
                  He just go a PSE Freak
                  Lol my attention span Is zero

                  Comment


                    Originally posted by hoyt21 View Post
                    Lol my attention span Is zero
                    Mine is similar

                    Comment



                      Bringin it in a little bit

                      Comment


                        The shop I'm at has a stsbilizer mounted chrono, and it measured 277 for a speed. Not too bad for 8 gpp

                        Comment


                          Dang it muddy more fletching problems!

                          .
                          .
                          .
                          .
                          .

                          Comment


                            Originally posted by BTGuard View Post
                            Dang it muddy more fletching problems!

                            .
                            .
                            .
                            .
                            .

                            Good problem! Not real expensive

                            Comment


                              That's true it's a problem in willing to pay for

                              Comment


                                Originally posted by BTGuard View Post

                                Bringin it in a little bit

                                Looking good

                                Comment

                                Working...
                                X