Foxpro Stand Help!

[BuckTag]

I have a foxpro scorpion and wanted to use two speakers with it. I mounted it all on the metal rid stand and with it all plugged up I hear the caller going, but I also hear a lot of static....

Anyone know how to stop the static? The speaker wire plugs into the two ports for a L and R speaker when you wanna as them...

[Brack]

I wish I could hear it, and I might be able to help. There are a couple of things that can cause it. It could be the quality of speakers or it could be the sound file. I have a single speaker turbo dogg. I put some custom sounds on mine. I had issues with static and distortion on my custom sounds because I was recording the files in stereo. I finally figured out that I had to play a lot with my recorder and record in mono.

I would suggest playing around with it. Try some different speakers. If that don't fix it, you may have to play with the sound files. I don't know if that was helpful at all, but good luck to you.

[BuckTag]

They're those Bluetooth $30 speakers from RadioShack. The night I used it yotes and bobcats came in no problems, but the battery life sucked. Probably just suck it up and buy the two speakers made for it by foxpro.