I bought some cheap to try. Really like the idea. Mine are standard size. Arrows are gt expedition hunters and beman ics. I pull nock off, slip fob on, and put nock back in. I shot two arrows this am. The fob came off when it hit target(not pass thru ). Am i doing some thing wrong?
-
-
Heres a pic. Thats as far as the nock will go cause of lip on fob. But then the nock will slide on thru.
-
Hopefully Mudslinger will be on here soonComment
-
-
Are they original fobs?Comment
-
-
Anybody?Comment
-
I just text em the link Sam.Comment
-
Wrong size FOB's. The Fob's should fit to the bottom of the nock's neck that fits down inside the shaft. The nock should not be able to fit through the FOB. Look at www.starrflight.com and see what size you need.Comment
-
Originally posted by Mudslinger View Post
Ive got standard size. Im using gt and beman ics. They should work. They both have wraps on them.Comment
-
Im using reg gt nocks and the nocks that came with the bemansComment
-
FOB's are mislabeled or something as the nock, should not fit inside the FOB. I do not think it is the shaft, wraps or nock, it has to be the FOB as the nock diameter is not going to be bigger than the diameter of the shaft and that nock is fitting through the FOB, not good. That is all I can think of right now.Comment
-
Originally posted by Mudslinger View Post
Is there a size bigger than standard? Maybe for aluminum arrows?Comment
-
-
Not sure about the sizing, I use the standard size also for my Gold Tip XT's with a signature nock. Something is weird. the lip on the FOB should stop the nock and also stop the shaft at the point on the opposite side of the nock basically inside the FOB.
If he has some sizes for aluminum, he is not showing it. The standard is the biggest size.
May want to try the suggestion on the website and get some SuperNocks.
Without seeing this in person, this has me baffeled.Comment
Comment