Announcement

Collapse
No announcement yet.

Need help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help

    The good news is that I'm shooting tight groups, bad news is that the group is 6 inches straight left of my point of aim. I'm shooting level and my release is smooth. However I did just change to Easton FMJ's which I did wrap and fletch myself with a slight right helical twist. My HHA sight has been maxed out all the way to the side and it's still not enough. I'm no expert so please help

    #2
    Have you checked (or had it checked) to see if your rest is squared away? I'd take it to a bow shop and have them look at it. I know just enough to be dangerous Also, it could be the new arrows (spine issue) but I wouldnt think so

    Comment


      #3
      I assume you are shooting a right handed bow?

      May not be the final fix as we can't see the setup, Move the entire rest in toward your riser in small increments.

      Comment


        #4
        I'll take all that into consideration, whakm I was thinking the same thing that it might have been knocked out of line or something and I shoot the same spine as the arrows I used to shoot.

        Comment


          #5
          Yeah best to go to pro shop so that way the to make sure the bow limbs arent torqued in any way.. Hopefully its just an alignment issue with the rest. good luck.

          Comment


            #6
            I would first check and make sure your not getting any contact with your fletching. Also are your old arrows still dead on? Best bet is take it to a good archery shop.

            Comment


              #7
              Originally posted by gonehuntin68 View Post
              I would first check and make sure your not getting any contact with your fletching. Also are your old arrows still dead on? Best bet is take it to a good archery shop.
              Quick easy way to check fletching contact (or eliminate it as the cause) is to rub the very edges of the veins with pencil lead. Shoot several and check for the graphite marking on your drop away (assuming your not using a biscuit) and/or an other part of the bow.

              Sounds though like your rest just needs to be adjusted (very incrementally).

              Comment


                #8
                Just checking that you're moving you're pin the correct way.
                If you're hitting left, you move your pin to the left.

                And that is the direction you moved it correct?
                Last edited by Mac...; 10-05-2013, 03:23 PM.

                Comment


                  #9
                  Shifted my rest over and the world is now right where it should be. Maybe it was knocked over somehow. Thanks a bunch everyone

                  Comment

                  Working...
                  X