I know I can go to the bow shop but I would like to see if anyone here in Burleson can cut about 1 in off some arrows I just picked up. They were cut about an inch to long. Or will they be ok an inch longer?
-
-
from what I understand you will only lose little speed. might have to resight your pins. -
AAJ, I cut mine with a dremal tool, and then square them with a arrow squaring tool. In Burleson too. Alvarado Archery has an arrow saw, be a small cost per arrow.
But, an inch isn't going to make much difference unless you are trying to match existing arrows. And even then may not mean much.Comment
Comment