Loud creak when drawing

[cbrown]

When I draw my Bowtech Invasion there is a load creak coming from the top cam until it breaks over....

Its set at 58#s with a string loop.

Any ideas?

[BOWtechnicianTX]

sounds like the rockers under the limbs are having some sticking/friction issues. If you are sure its coming from your cam, try to tighten your mod screws. There may be one you cant get to thou.

[rocky]

sounds like the rockers under the limbs are having some sticking/friction issues. If you are sure its coming from your cam, try to tighten your mod screws. There may be one you cant get to thou.

Had one last week with same issue.
Had to disassemble bow and grease pivots and limbbolts.
Fixed.