Ok, i was shooting tonight and had two different arrows that a vane came off of. I kept shooting them because i didnt wanna go in and get two more. Funny part was they were grouped closer the spot i was shooting than the two with all three vanes.
-
-
So I should consider stripping one of the vanes off of my arrows?
I know if the vane is only partially torn off it will make a hell of a noise! -
-
Maybe the vane that came off was making contact with something???Comment
-
-
-
One was the up vane and one was the vane to the inside.Comment
-
Shooting thru a wb rest.Comment
-
Try a qad and you'll get a good group with all 3 vanes...Comment
-
Thx, but im sticking with the wb. Didnt the three vaned arrows was a bad group, cause all four arrows were grouped good, just the two were a little tighter.Originally posted by tyak View PostComment
-
Probably just a coincidence... Did you shoot multiple sets and have the same results? I wouldn't read too much into it, three vanes should fly more true out further because they are equally spaced. Two vanes should start doing a little fish tailing.Originally posted by sambo73 View PostComment
-
Was shooting at 20yds. Shot bout 3 sets. Was getting dark.Originally posted by BURTONboy View PostComment
-
Comment
Comment