Ok, after i went back reset center shot and adjusted my knocking point(it was about 1/4" too high), i ordered some blazer vanes and vantec hp 2.0 vanes. I refletched 4 arrows. I also cut wraps in half. I fletched two with blazer and two with vanetec. Im using az ez fletch right helical(not the mini), its the blue so really a slight offset on blazer style vanes. 
I got in late tonight so had to shoot quick. Shot at 16yds cause of low light, and thats where Jerry at rbo told me to start. Shooting st 100gr mag. Shoot bh and then 3 fp. First shot, right where i was aiming. Now the fp"s. All four arrows were in a tight wad. Repeated til i shot bh on all four arrows. Last group wasnt as tight( less light) i believe im ready to step back to, say 40 and see what happens.
Oh yea, just for giggles i shot the buzzcut that i was having trouble with. Right where i had my pin and.one fp, nearly touching. So im happy. Will shot at 40 tomorrow in daylight. The last athens accomplice 34 would shoot tricks at 40 right with fp..
I got in late tonight so had to shoot quick. Shot at 16yds cause of low light, and thats where Jerry at rbo told me to start. Shooting st 100gr mag. Shoot bh and then 3 fp. First shot, right where i was aiming. Now the fp"s. All four arrows were in a tight wad. Repeated til i shot bh on all four arrows. Last group wasnt as tight( less light) i believe im ready to step back to, say 40 and see what happens.
Oh yea, just for giggles i shot the buzzcut that i was having trouble with. Right where i had my pin and.one fp, nearly touching. So im happy. Will shot at 40 tomorrow in daylight. The last athens accomplice 34 would shoot tricks at 40 right with fp..
i shot the st 100gr mag about 6x, followed by a couple fp. All arrows were in the dished out section, with all but a couple in the taped section.
Comment