Arrow length

[Sideler]

I'm ordering new arrows and was wondering if I should order shorter arrows than what I have now. What do you think?

[T-Wall88]

I cut my arrows so they sit in the middle of riser. But make sure your broadheads aren't going to hit the riser. hope this helps

[tjb86]

I cut my arrows so they sit in the middle of riser. But make sure your broadheads aren't going to hit the riser. hope this helps

This is how I have mine set up too.

[White Falcon]

I go with 1" past the riser! less chance of running one through your arm. My $.02

[Matt_C]

Also, less chance of hitting your thumb you have stuck up there!

[Swat791]

I go with 1" past the riser! less chance of running one through your arm. My $.02

I second that.

[dbelcher269]

You might try downing the free version of OnTarget2 software. Pretty accurate program and it can get you pretty close to your optimum arrow length. For me I have mine cut almost exactly like yours. I know I will not have any issues with whatever broad head I choose to shoot.

[quackaholic1]

1" past the riser here too. Yours looks fine to me.

[Polaris700]

Looks good the length they are.

[Unicorn]

Perfect length as they are, especially if you're comfortable with it. Most folks would be a little shorter but it's YOU shooting and it ain't too long.

[wsteffen]

1" past the riser here too. Yours looks fine to me.

Looks good to me

[Skullworks52]

keep it that length, you wont notice the difference in speed and you have a safer set up if the arrow fell off the rest it is in front of your hand and also you don't have to worry about a large dia. fixed broad head.