Arrow spine ?

[sambo73]

My daughter is shooting a mission menace. Draw length is 21",,dw is 22#. Would a 400 spine cut at 25.5" be too stiff, with a 125gr tip?

[sambo73]

Or would a 3555 be better?

[bow_nut81]

I'm thinking 3555

[Bilbo]

3555 or maybe a 500 spine. At that low of a draw weight it's not going to make much difference what is used.

[clayg08]

3555 or maybe a 500 spine. At that low of a draw weight it's not going to make much difference what is used.

even without looking at charts, ^^^ this sounds right

[sambo73]

Thx. Shots will be limited to 10yds and under, using a coc 2 blade

[beardedBrazos]

i dont mean to hyjack the thread here, but i have a ?. what are the consequences of shooting an arrow with too much spine?

[T-Wall88]

Too much spine will not allow the arrow to flex enough, there for tuning is near impossible. Better to be heavy spinned than under tho. I would use ics junior arrows for her

[sambo73]

Thx, i just bought her some new 3555's. Got em cheap. Will see how they do. Any suggestions on how long to cut em?

[mr.quick]

Thx, i just bought her some new 3555's. Got em cheap. Will see how they do. Any suggestions on how long to cut em?

me personally I like cutting them 2 inches longer, that way if I miss and they get damaged at least I have a chance to gut them to my original d/l