Announcement

Collapse
No announcement yet.

Draw length and sights.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Draw length and sights.

    Bought a used bow and needed to make the d.l. one inch longer. Bought the modules , put them on and had to move my sight way down and moved the peep. Just doesn't seem right to have to move my sight that far down. Any suggestions ?

    #2
    If you have to move your peep which can make your sights move not the same sight pic

    Comment


      #3
      Could not get my nose on the string with the shorter d.l.. Bow shop told me to go with the 1 inch longer d.l. and could get my nose on the string and I would be much more comfortable shooting , which I am more comfy.

      Comment


        #4
        Yeah and so it changed anchor points to which can alter your sights one way or another. I think it's normal do you have enough gang adjustment to move the sight bracet

        Comment


          #5
          Bracket dumb phone

          Comment


            #6
            Yes I still have about another half inch before the sight bracket is bottomed out. Just wondering if that was normal that that happened. Guess I can quit worrying about it now. Thanks for the info.

            Comment


              #7
              No prob

              Comment


                #8
                Got any pics of yourself at full draw? You might be anchoring too high on your face, meaning your peep will be ver low, and your sight will be very low also. Moving your anchor down will let you move your peep up and then your sight will moe up also, more to the center of the bracket.

                Comment


                  #9
                  the troubles of change in a bow

                  Comment

                  Working...
                  X