Announcement

Collapse
No announcement yet.

Custom Armortech Axcel Sights

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Custom Armortech Axcel Sights

    I already have a four pin sight but I'm looking to change it up a bit. I love the sight but I have a hard time seeing the red pin when it starts getting dark. I have gone to their website but I can't seem to find information on how to customize them I know a bunch of people out there have done this but how do you go about it?

    #2
    I called them last week about having my bottom two pins, on my four pin sight, changed to .010's. I was told it was a $15 flat fee and then $15 per pin. That $15 per pin included changing to whatever size or color you want.

    Comment


      #3
      Get a light for the sight.

      Comment


        #4
        Originally posted by Booger74 View Post
        Get a light for the sight.
        I already have one but the red just does not seem to do it for my eyes. Green and yellow...

        Comment


          #5
          I have a hard time with the yellow. If I send mine in, I'm getting all green or green and red alternating.
          Last edited by bbinford; 03-01-2013, 08:19 AM.

          Comment


            #6
            X2 call them. I would also suggest that you may want to consider going to all green. I did the same change years ago to find that the yellow pins were hard to see compared to the green. Later I went with all green and never looked back. I was a little worried that it would be a little confusing having them all the same, but it turned out to be easier for me to not have to decipher through the different colors. Good luck.

            Comment


              #7
              Have you tried to restring the pins with the colors you want? It isn't too difficult or expensive. I suggest orange if you have a hard time with red.

              Comment


                #8
                Originally posted by ELKAHOLIC View Post
                X2 call them. I would also suggest that you may want to consider going to all green. I did the same change years ago to find that the yellow pins were hard to see compared to the green. Later I went with all green and never looked back. I was a little worried that it would be a little confusing having them all the same, but it turned out to be easier for me to not have to decipher through the different colors. Good luck.
                I did alot of research before I bought my spot hogg and from what I found, green is the easiest color to see with yellow being second. Blue and red are the toughest, especially in low-light situations.

                I bought my 5-pin customized with alternating colors (green, yellow, green, yellow, green). Very bright, works well, couldn't be happier

                Comment


                  #9
                  Originally posted by Deers & Beers View Post
                  I did alot of research before I bought my spot hogg and from what I found, green is the easiest color to see with yellow being second. Blue and red are the toughest, especially in low-light situations.

                  I bought my 5-pin customized with alternating colors (green, yellow, green, yellow, green). Very bright, works well, couldn't be happier
                  good info

                  Comment

                  Working...
                  X