Fusions and the wb

[sambo73]

Anybody shoot this combo?

[sambo73]

Not the zeon. They didnt do so well.

[sambo73]

Ttt

[CamoQuest]

I used zeons last year thru a WB and didn't have any problems. I didn't try the regular fusions tho. If they were louder than Blazers I didn't notice, but I used them during 3-D shoots and wasn't paying much attention to the noise factor.

[ram6256]

I shoot the standard fusions 2.1 through the biscuit an have had absolutely no problems, IF I do the fletching job correctly.
Roy

[sambo73]

Thanks

[glpoe1]

I do not shoot a WB but I shoot the fusion and they are stiffer and seem to be more durable than other vanes. I would think they would work very well. They are easier to fletch than other vanes as well.

[cricman]

I shot both the 2 and 3 inch through a WB for about a year and had no issues at all. I started with the 2 inch, and after several months and hundreds of shots through a WB, I decided to try 3 inch fusions. I had a heck of a time removing the 2 inch vanes! I was using the Gorilla Super Glue.


cricman

[sambo73]

I shot both the 2 and 3 inch through a WB for about a year and had no issues at all. I started with the 2 inch, and after several months and hundreds of shots through a WB, I decided to try 3 inch fusions. I had a heck of a time removing the 2 inch vanes! I was using the Gorilla Super Glue.


cricman

Which steered the bh better?

[BTLowry]

I have shot that combo, works great

[cricman]

Which steered the bh better?

I'm not sure that I am good enough to tell the difference! They seemed to be equally effective. The main reason I switched was to get better fletching clearance.


cricman