Nockturnal Nocks for Beaman ICS Hunter 400

[jimmyneutrontx]

Which Nocturnals are y'all using? Nockturnals website says "S" fits in ICS Hunter shafts but I bought 2 packages of 3 and none of them fits.

I guess either the packages where labeled wrong or I'm missing something.

[Rambow]

S is correct

[Meatatarian]

My buddies wife had put them in the ICS Hunters and they were all loose. When she pulled an arrow off of the string, the nock was stuck to the bow string.

[Spoken0313]

My buddies wife had put them in the ICS Hunters and they were all loose. When she pulled an arrow off of the string, the nock was stuck to the bow string.

I always wrap a little Teflon thread tape around the end of mine before i put them in the arrow, it gives a tighter fit and the tape is light. she might give it a try

[JW]

Which Nocturnals are y'all using? Nockturnals website says "S" fits in ICS Hunter shafts but I bought 2 packages of 3 and none of them fits.

I guess either the packages where labeled wrong or I'm missing something.

They packaged em wrong. Take em back.

[ballsie]

Whoa, I bought 3 Nocturnal S last week at academy and returned them yesterday because they dont fit my ICS Hunter 400's. They werent even close to being tight enough.

[stickerpatch59]

mine were so tight in my ics hunters that i thought that i was going to break them putting them in, finally put a little alchohol on them and barely got them in... i shoot the 340's

[SAGEBRUSH ASSASSIN]

I got some GT series nocks for my gold tips and they are loose also. They stay in the arrow for target shooting but not tight as I would like. I will have to try the teflon tape to tighten them up.

[Codypatt1]

I wrap my Ics hunter elites in cling wrap to make them tighter on the shaft. Doesn't take much at all.

[ballisticbudda]

Plastic shopping bag will work as well to help tighten up those nocks and the price is right.