Sight position with different arrows

[Sully352]

I have a assassin that I had a nap Apache rest on and it was set with a beman speed arrow I havs changed to beman bone collector axis arrows and have the sight almost maxed down what is the GS opinion? Pic heavy

[Rather_B_Fishin]

Flip the mounting bracket that mounts to your bow.

[rocky]

Nock point is higher than I think it should be.
Also, make sure DL is not too long, or anchor is too high, causing low peep position.

[rocky]

Flip the mounting bracket that mounts to your bow.

Bracket is on the low mount setting.

[Mudslinger]

I agree with Rocky, your loop is to high and the arrow is pointing downward.

[SabineRR]

I agree with Rocky, your loop is to high and the arrow is pointing downward.

x3 on this one

[jcstarken]

DL is to long get that checked trust me i speak from experience and the GS helped me figure that out speed is nothing with out accuracy

[Richard]

Nock point is higher than I think it should be.
Also, make sure DL is not too long, or anchor is too high, causing low peep position.

This.

[PACRMX]

There are many things that could be wrong, but by looking at the picture the first thing I see is that the rest is set low or nocking point is high, or even a combination of both. You have to get everything squared. It seems that it was not set right since your previous arrows.