Hoyts rtk&cam 1/2 and QAD rest

[Twztid]

Friendly reminder and helps if you read the instructions! i was getting redicilous contact on my new blazers and even with my feather arrows. i installed my new qad hdx rest and never thought that was the issue being 400fps tested and i was only at 318fps. i figured it was a timing issue. nope for hoyts you must change the launcher to the LT1 thats included in the kit.
QUOTE from QAD SITE: Cam & 1/2- Hoyt

- Swap out the Standard launcher with the TL1 launcher*. The TL1 is a spare launcher that comes with all Ultra-Rests. The TL1 is a 1/8 inch higher in the valley, which provides additional drop away clearance

well needless to say my arrows are flying stright and alot more consistant

[Twztid]

Some pictures if you can see the scrape marks on the rest..

[El Coyote]

So that's what was giving you problems..

[Twztid]

So that's what was giving you problems..

I shot my new arrows prob 100 times yesterday moving my sight and never could get a group and watching my arrows kick left and right comming out of the bow..flipped the cocked fletching and that's when I noticed it hitting. So then i got out the instructions and found this info! Now I'm stoked I used feathers because I never could get blazers to fly consistent as my feathers. Well now I'm just if not better with the blazers

[hully1029]

wow! guess i need to start reading instructions. i got rid of my qad because of that same reason and i am shooting a hoyt with cam & 1/2.. thanks!!!!

[rhendrix]

Is that just with the new RKT cams? I've had a QAD on three hoyts now and never had fletching clearance problems with the Fuel or XTR cams.

[DoubleGArchery]

We don't ever change them out always work on the timing on the rest. We make sure the white line on the rest is straight across from each other. No timing issues.