Announcement

Collapse
No announcement yet.

MACH 33 - Accessory Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    MACH 33 - Accessory Help

    I have a brand-new MACH 33 on order which should arrive in the new few weeks. I sold my previous bow as a RTH package with all my beloved accessories still attached because they would be perfect for my buddy hunting the mountains of New Mexico. I'm looking for recommendations on sights, stabilizers, quivers, and arrow rests. I went will the MACH 33 due to its light weight and the full draw stability. I frequently take long walks into my sets and need a rig that is light. What are some of y'all's recommendations?

    #2
    Qad
    doesn’t Pse have a proprietary quiver? If not tight spot.
    if budget isn’t a issue get cutter stabilizers.
    Spot hog is bullet proof but not exactly light, or the UV sight

    Comment


      #3
      Originally posted by kd350 View Post
      Qad
      doesn’t Pse have a proprietary quiver? If not tight spot.
      if budget isn’t a issue get cutter stabilizers.
      Spot hog is bullet proof but not exactly light, or the UV sight
      I'm not sure on the quiver, thank you for the recommendations. I usually shoot the same bow for 5-7 years with little changes to my attachments. Every time I buy a new bow the technology has changed so much it's hard to keep up.

      Comment


        #4
        I have a Mach 30 with a TightSpot Airlock quiver. It's very lightweight and really well designed, both the clamping mechanism to the bow and the built-in clip to lift it into a treestand with a piece of paracord. For sight, I went with a Montana Black Gold Dual Track (made here in Montana in Belgrade). It operates like a 'normal' single-pin sight, which you adjust for different ranges, but it also has a secondary lower pin, which I set for 40 when my upper is at 20. If my upper is 40, the lower is at 56 or 57 yards. Most of my hunting is spot and stalk, so I leave it a 20/40. I'd adjust the center pin to the distance if there's a longer shot. I reused my old Ripcord Code Red rest and Stokerize stabilizer so I'm no help on what's available today.

        Comment


          #5
          I have a 33
          the Black Eagle/ Conquest Talon quiver - best quiver I’ve used, light weight, easy on pocketbooks
          i have the new Axcel Driver sight coming.
          Hamskea arrow rests. Most bullet proof rest on the market.

          Comment


            #6
            Thank y'all for all the recommendations! Definitely going to look into these products

            Comment


              #7
              After ordering my Mach 33 at the beginning of November(!), I finally received it about a week ago. Four-and-a-half months. On it, I have a QAD rest and a Dialed Pruf sight. I have a Tight Spot quiver, but I am considering getting one of PSE's integrated quivers. I am using Easton's new 5.0 arrows, 300 spine. I also have a new Spott Hog Wiseguy release with a BOA strap tightener. I really like the release.

              Comment


                #8
                Went with the Black Gold Ascent Verdict, Ripcord Ratchet (cable driven), and a 10" Cutter Stabilizer. Haven't purchased a quiver for it yet, but the bow itself is the best bow itself is outstanding. Almost completely dead in the hand on shot, super light, going to be perfect for my style of hunting.

                Comment

                Working...
                X