Have a Z7 that has a little cam tilt. When pulled back the cam is real close or frog hairs are touching. Cable is a little discolored but nothing fraided. Keep shooting it? Took it to shop, they said it be ok.
-
-
Should be able to adjust by adding twist in one side of yoke and loosening another.
any bow shop that does not see cam lean as a less efficient (performance wise) bow is a shop i would not let wrench on my bow. -
I’m m not supper familiar with that bow… but the yoke is on the idler wheel correct? If so that won’t fix cam lean
more than likely needs shims or swap limbsComment
Comment