I know most people probably aren't shooting this bow, but for those that are, this should be helpful, as there is literally no documentation on this thing. I finally got a call back from bowtech and they were very helpful, gave me all the specs and timing info, and everything else I needed to know.
Draw weight: 60-70 lbs
Draw length: 25-30 inches
Axle to axle: 32 5/8 inches
Brace height: 7 inches
String length: 89 1/4 inches
Cable length: 34 3/16 inches
Timing marks should have 3 3/4 inside the limb. There are 6 marks, so 2 1/4 should show above the limb. To advance the cam (show more marks), add twists to the cable. To retard the cam (show fewer marks), add twists to the string. Adding twists reduces ATA, removing twists increases ATA.
Draw stop post settings may be adjusted a half notch from the base setting in either direction to change letoff and draw length
25" - 2.3
26" - 3.9
27" - 5.1
28" - 6.1
29" - 7.1
30" - 8.1
Draw weight: 60-70 lbs
Draw length: 25-30 inches
Axle to axle: 32 5/8 inches
Brace height: 7 inches
String length: 89 1/4 inches
Cable length: 34 3/16 inches
Timing marks should have 3 3/4 inside the limb. There are 6 marks, so 2 1/4 should show above the limb. To advance the cam (show more marks), add twists to the cable. To retard the cam (show fewer marks), add twists to the string. Adding twists reduces ATA, removing twists increases ATA.
Draw stop post settings may be adjusted a half notch from the base setting in either direction to change letoff and draw length
25" - 2.3
26" - 3.9
27" - 5.1
28" - 6.1
29" - 7.1
30" - 8.1