Announcement

Collapse
No announcement yet.

Fusion Vanes Changing POI?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fusion Vanes Changing POI?

    I fletched an arrow with Fusions yesterday with an Arizona Mini Fletch and decided to shoot it today. I am currently shooting Blazers with I think a 2 deg offset, the Mini is 6 deg I think. Long story short, I am shooting 8" to the right at 40 yards through a WB. Just wanted to see if this is normal. I will probably change all of my arrows to the Fusions after the season. They actually seemed to be quieter and appeared to plane out better than the Blazers. They are for sure easier to install.

    #2
    You will see a poi change with the fusions as they are heavier. Never did see that big of one when I experimented with them. Heavy helical through a WB could be the main culprit though. Good luck with your testing.....

    Comment


      #3
      I bet because they are so tall they are hitting the frame that holds the bristles. I had problems with this with blazers and switched back to 4inch vanes for better clearance.

      Comment


        #4
        Originally posted by oktx View Post
        I bet because they are so tall they are hitting the frame that holds the bristles.
        Yep

        Comment


          #5
          I had clearance issues with blazers too. Switched to 3" fusions this season, I like them a lot better. Better clearance, stabilize better. They weigh 8 grains to the Blazers 5 so unnoticably slower, but the lower profile and quiet stability won me over. Easier to fletch also, they stick to anything.

          Comment


            #6
            Check clearance. They will go through cleanly but only if tuned just right.

            Comment

            Working...
            X