Remove dead stop from z7

[riohondo]

I tried to remove the dead stop from my z7 in order to install an Athens Anchor Stop. Howevever as I unscrewed the stud from the brass grommet on the back of the bow, the grommet began to unscrew from the riser so I stopped while I was ahead. I'm not sure if the stud and grommet are one piece or if they have just corroded together. Any ideas?

[47]

http://discussions.texasbowhunter.com/forums/showpost.php?p=4625602&postcount=5

[riohondo]

Thanks CTL! Im learning ropes on this site and couldn't find my thread from yesterday so I posted it again. Oops!