Slick Trick help

[Brock Middlebrook]

For hunting deer, 1" or 1 1/8" magnum? I shoot 100gr tip, Beaman ICS 400, and a 60lb bow.

Thanks

[JHanchera]

I think that you'll find they both work. I shoot a 100g magnum, since it has a little more cutting diameter. Both would be just fine.

[BOWMAN1836]

I use all three of them and they all shoot the same. Great broadhead.

[keep]

You shoot a set up very similar to my wife's set up and she uses the mag's and never had a problem.
If I were going for moose with 60# I might go standard or possibly elk but for all other NA game a mag will be fine.

[Nitro1970]

Mags

[locoengineer]

i shoot 62# fmj 340's slick trick 100gr standards this deer went 22 yards and piled up full pass thru

[tmurray]

Mags for me but you could put them all in a pile and grab one blindfolded and you'd be fine. Honestly they're all great.

[PSD Ryan]

I use the magnums. If I could for some reason not tune them, I'd shoot standards, but I don't believe in a non tunable broadhead.

If I reached in a pile blidnfolded and grabbed one I'd probably not be fine...I'd be cut up!

[stan]

I generally use the standards, but as others have said, all are okay. I've just never had a reason to switch from the one that works for me.

[pigsticker64]

ether one will work well, I have shot them both and can't tell any differance in the way they shoot. my vote is MAG.

[cksweat678]

Mags will work all day long. The only reason I would choose standard over Mags is if I were going strictly for anything bigger boned than whitetail.

I generally dont have to shoot past 35 yards so I went with Mags for the larger cut and they have been good to me.

[BIG IRON]

Mags for me but you could put them all in a pile and grab one blindfolded and you'd be fine. Honestly they're all great.

Unless you cut your hand

I have killed with both, same set up as you have but I am pulling 63#.

[bfnavarrete]

i have very similar set up as you, and the razor is on point! dont think you can go wront with either. 1 1/8 or below and you should be good. i find on my set up, 1 1/2 inch blades start to drift.