Easton N-fused epic

[Cabeza_De_Toro]

I am thinking about buying the new N-fused arrows and need to know which ones to get. My draw length is 27" and draw weight is 65 lbs.
Also, I am shooting a Bowtech Assassin if it matters.
All info greatly appreciated.

[Sparkles]

400s should work how long are your arrows going to be?

[Cabeza_De_Toro]

Not really sure, I just got into bow hunting not long ago and have been using some of my dads arrows that I don't think are the right length.

[Sparkles]

Well length isn't really that inportant as long as the arrow is spined right. You can shoot a full length shaft if the spine (stiffness) is correct. I think you'll be fine with 400s as long as you stay around 27-28" arrow range. There is actually a chart on the box for the epics that will tell you what you need.

[Sparkles]

http://www.huntersfriend.com/carbon_...deflection.htm here is a spine chart BTW I have been shooting epics for about 5 years now and really like em.

[Cabeza_De_Toro]

Thank you very much!

[Sparkles]

Anytime buddy. Welcome to the green screen btw and good luck this season.

[Cabeza_De_Toro]

Thanks, you too.

[txdukklr]

great arrows I've been shooting them for two years. I gained speed with them over my fmj's.

I'm shooting similar specs and the 400's are the arrows you need

[Cabeza_De_Toro]

Alright, thanks for the advice.

[Brazman]

I just picked up my first batch of these arrows in a .400 spine. Haven't blooded them yet, but I like how they shoot and they draw quieter than my first set of arrows, CX Predator IIs.

[stan]

I've had excellent success with these arrows. I shoot the 400's with a 28 1/2" draw length and 62 lbs. Great penetration on deer and hogs.

[Texaskid82]

What's the difference in the epic and axis? I shoot fmj's and was thinking about switching. Thanks in advance.

[bfnavarrete]

400 is what you need. awesome arrows. its what i shoot on my elite set at 66lbs and 26.5in DL

[ram6256]

Epics are just a little larger diameter, with a different insert