For any of you that may have recently purchased the EVO, you may have noticed the bow to develop a "clicking" noise during the draw. The fix is simple and the fix has since been incorporated into bows from factory. Four little brass washers added where the limbs bolt to the pockets is what they tell me. Just waiting for them to come in. Other than that, the bow is pure sweetness.
-
-
Haven't notice any noise on mine yet. Had it about two months now.
Put up a new ladder stand today at the lease. Had to take a few shots from it just to check it out and my lease partner remarked how quiet it was. He was at the base of the tree and couldn't hear it. Love my Evo. -
You may check to see if there are little brass washers as I mentioned. If you do, you probably have one of the bows manufactured after the problem was recognized. If you don't, be aware because mine started making the clicking after about 300 arrows.Comment
-
Couldn't see any brass washers. If mine starts to make that noise I'll know what the fix is, thanks for the heads up.Comment
-
I had the same problem. Had CCR grease the limb pockets and the noise is gone. This bow shoots like a dream. I shot Mathews foir 20 years but love my EVO!!Comment
Comment