Adjusting Draw length

[Daddy Rabbit]

When adjusting the draw length on a PSE Spyder. Do you have to change the where the cable ties onto the cam at the same time that you adjust the point where the string ties on? Or can you just move the string to a different peg to adjust the draw length?

I am sure that what you do to one end you have to do the same to the other end or you will get your cams out of time. Just not sure if you have to adjust the cables at the same if they will mess up the timing of the cams.

All help appreciated

[Geezy Rider]

Don't know the answer but if you can't get it figured out here, then you might take it on down to Pidgon Rd. in Stevenville. Great shop and really know their PSE's.

[Daddy Rabbit]

I might just have to do that. Someone told me that was a pretty good bow shop one time.

[t townsend]

one of best shops in state

[HeyMikey]

Adjusting draw length shouldn't require any adjusting of the cables themselves, on most PSE's. Possibly a cam module replacement, but likely, adjusting the placement of the module is all thta's necessary. If you're not sure, leave it to a pro (which I am not).