Z7 Noise

[Okiehunter]

My z7 has developed a slight "creek" noise at almost full draw. Any ideas?

[focushunter]

The qcc maybe they had a problem with them on the reezens doing the same thing

[red]

If you have a press, take off the qcc's and lightly sand them on the back side where they touch the limb. If that don't do it, look at your limb turrets and see if they look like mine did. Had to replace the turrets

[berto]

not sure about sanding it, will that void the warrenty

[wellingtontx]

Take it to the shop and let them look at it.

[txdukklr]

Take it to the shop and let them look at it.

this

[rvd]

this

For sure

[dipstick105]

could be a small crack in the limb, had a buddy on another mathew's that had a small noise at almost full draw turnes out it was the limb CRACKING

[mathews1]

I had the same problem with my z7 you need a bow press and there are plastic button type things that your string is wrapped around on the sides of the limb they need to be taken off and sanded and I put alittle Vaseline on mine for reassurance

[Mojo]

take it to da chop!! don't be jackin' around on a warrantied thing possibly...

[hoythunter28]

Take it to the pro's thats what they are there for.

[timbobowhunter]

Take it to the pro's thats what they are there for.

^^^^^^^^^^^This^^^^^^^^^^^^^

[Loreva13]

Take it to the pro's thats what they are there for.

^^^This is what I would do.

[Brack]

The qcc maybe they had a problem with them on the reezens doing the same thing

Probably is this. If you don't go to the shop and don't want to sand, try a little wax on the back.

[southpaw]

Had the same noise on my old MQ1. Took it to the shop, they broke it down greased it up where the limbs attach to the riser. Noise went away.