need some help

[Jminor05]

well heres the deal. im new to bowhunting and have a bowtech destroyer 340. it has a hha single pin sight that im having trouble sighting it in..if anyone in the east texas area would mind lending me a hand sighting it in it would be greatly appreciated.

[Mudslinger]

Welcome to the green screen addiction. Keep bumping this to the top and some of the East TX boys will chime in and give you a hand. Might want to put this over in Around the Campfire also, might get more replies.

[El Coyote]

What yardage are you shooting and where is it going?

[Jminor05]

What yardage are you shooting and where is it going?

shooting at about 20 yards and its hitting low to my left

[rocky]

Bottom the slide arm out, then move the housing in the screw holes until you are as close as you can get to 20 yards,
Now you will have the full range of adjustment.
As far as windage,(side to side) just move the sight to the arrow.

[El Coyote]

Bottom the slide arm out, then move the housing in the screw holes until you are as close as you can get to 20 yards,
Now you will have the full range of adjustment.
As far as windage,(side to side) just move the sight to the arrow.

X2 follow the arrow with the pin movement arrow going to the left then move pin to left a little at a time

[Coach W]

Listen to Rocky Hes the man.

Welcome to the fire!

[Jminor05]

appreciate it guys will get on it and see what i can do

[jathomas437]

You need to check your center shot and nock point first by paper tuning and walk back tuning before you even touch the sight. Also, are your arrows spined correctly for your bow poundage and draw length?

[thebomb6_99]

I Also shoot that bow with the same sight. Pretty much just follow the arrow. Is your bow tuned?

[Jminor05]

appreciate the help guys havent had a chance to get on it but will asap