Refletching arrows with wraps

[Patton]

I am putting the NAP Quickspin fletching wraps on my Cabelas Carbon Hunter 55/70 arrows. After doing two, I realized there are some minor air bubbles, and I also accidently set the fletchings about 1/4" off on of them.

How much will this affect the flight between the two? and should the fletching wrap go as far back on the arrow as possible, not including the nok?

Thanks in advance

[froghunter]

i put mine all the way back. I have used a razor blade get rid of air bubbles. not a great fix but will work if you have to do it.

[Patton]

Ttt

[Patton]

Up

[casilva43]

yes, where the nock ends and the shaft begins.

[*DW*]

I've found to avoid the air bubbles dip the arrow in slowly and let watch the air bubbles rise to the top out of the wrap.