A little different arrow question.

[Texastaxi]

In need an arrow, that has a 7mm (0.275") INSIDE diameter.

It can be carbon or aluminum. Anybody have access to this dimensional data?

[Mike Javi Cooper]

are you trying to make a footing for some woodies?

[Texastaxi]

I'm trying to get an arrow that I can fit a pen tube into.
The brass tube is 7mm OD.

[bowhuntntxn]

I am not sure you will find one. The largest OD I know of is a .270 for all of the new 27 series arrows folks are shooting indoors now.

correction. maybe look at easton 2712 aluminum arrow. or maybe even a 2613.

Ok you can take the shaft size(24) divide by 64, then subtract the last 2 digits in thousands of an inch for ID of shafts. example:

2613

26 divided by 64 = .406 in. minus .013 for wall thickness = .393 Id of that shaft which is 9.98mm.

[Mike Javi Cooper]

2018 is going to be about the closest...

20/64=312.5 - .036 = .276.5 roughly...

[Texastaxi]

Thanks, Javi ... I started shooting carbons from day 1, so I had no idea how the sizing went on the aluminums.

You got any laying around? West Houston Archery didn't have any aluminum arrows, in stock.

[Mike Javi Cooper]

Thanks, Javi ... I started shooting carbons from day 1, so I had no idea how the sizing went on the aluminums.

You got any laying around? West Houston Archery didn't have any aluminum arrows, in stock.

I don't have any 2018's but someone in the Trad section should have some bent ones... if not let me know and I'll see what I can find at the store or maybe the club trash bin...

[Texastaxi]

I'll put up a want add and see if I get any hits.

[TedStriker]

Find some genesis arrows, they're 2018 an 1/2 dz for 25