Hoyt Command Cam

[Lowe]

On the old Hoyt Command Cams can the drawlength be adjusted by moving the string to another post on the cam or do you have to replace a module? If module replacement is required does anyone have source to get them?

I shot the command cams years ago but do not remember.

Thanks.

[Goldeneagle]

It's been a while, but I think you change to different posts on the cam. Don't quote me on that though. Haven't had Command Cams in a while.

[DavidS]

The old command cams have posts that you move the string to for length adjustment. They also have a module on them that is moveable by removing the 2 screws and moving he module to te desired draw length. IMHO that isthe smoothest drawing cam ever manufactured!!!!

[Lowe]

Thanks for the info guys.

[cricman]

The old command cams have posts that you move the string to for length adjustment. They also have a module on them that is moveable by removing the 2 screws and moving he module to te desired draw length. IMHO that isthe smoothest drawing cam ever manufactured!!!!

X2. I just sold a 2001 Magnatec with CCs. Super smooth and easy to tune. My only complaint was that the wall wasn't as pronounced as it seems to be on "modern" cams.

cricman