Announcement

Collapse
No announcement yet.

truglo sights

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    truglo sights

    Does anyone know what size pins come standard on truglo sights? I'm looking to buy a new sight and I know I want the pin size smaller than what is on my truglo.

    #2
    Depends on which one.

    Most are .029 and some are .019, I don't see any listed as .010

    Comment


      #3
      This year I went to the tru-glo micro-brite 3 pin and it has 3 different sized pins with the smallest being .010. So far I like it.

      Here are the pin sizes

      top pin - .029
      middle pin - .019
      bottom pin - .010
      Last edited by rjet; 10-06-2010, 12:45 AM.

      Comment


        #4
        ya this depends..i bought my microbrite with 5 pin all .10

        ac

        Comment


          #5
          i bought the 5 pin with the 3 different size pins. my pins were great when the light was good, but when i turned on my light it looked like one long pin. so i took two of them out and it was great now.

          Comment


            #6
            The Range Rover comes in .010, the most common size seems to be .019 though probably because it is in the middle.

            Comment


              #7
              I think most of them are the 0.019

              Comment


                #8
                Thanks guys. I think mine must be the.029, they seem a large. Those that have the .10, how do you like them? Are they to small?

                Comment


                  #9
                  Most pins come .019. Get the truglo trusite extreme 5 pin wrapped. Good price n good sight.
                  I have the .010 on my botton two pins on my spot hogg and at 65 yds the pin is easily seen and does not take up my target...

                  Comment


                    #10
                    Most pins come .019. Get the truglo trusite extreme 5 pin wrapped. Good price n good sight.
                    I have the .010 on my botton two pins on my spot hogg and at 65 yds the pin is easily seen and does not take up my target...

                    Comment


                      #11
                      They’re typically .029”, .019”, or .010”. I shoot the 5 pin Micro-Brite (1 x .029, 2 x .019, 1 x .010). I like how my 50 & 60 yard pins are smaller. The large .029” pin blocks out too much of the target at long range. And when you’re hunting small deer like the one’s on my lease, this really helps.

                      Comment

                      Working...
                      X