What's your centershot

[canny]

I posted earlier about having tuning issues with my drenalin. I figured since the QAD rest and Mathews bows are so popular I would see what everyones centershot is measuring. So if you have this combination please post up your center shot measurements.

[Osceola]

11/16 on my dxt.

[rocky]

11/16 on my dxt.

AS it should be according to most others.

[Mike Javi Cooper]

Most Mathews bows end up at 11/16 with a drop away... the new Z7 is an exception it's at 13/16"

[canny]

11/16 on my dxt.

I went ahead and moved my rest out to 11/16" tomorrow I may try to get up to the shop and play with it. I'm also going to take some different arrows and experiment with those along with point weighs.

[rocky]

I went ahead and moved my rest out to 11/16" tomorrow I may try to get up to the shop and play with it. I'm also going to take some different arrows and experiment with those along with point weighs.

Did you ever check your cam and/or idler for lean?
Assuming your cam (lower limb) is straight, move center-shot out to 11/16 and if you are still getting a tail left tear, put 1 1/2 twist,(look at twist in split harness, and maintain direction) in the sight window side of split yoke, and without moving center-shot, i think you'll see an improvement.

[100%TtId]

I thought Mathews specs 13/16 for Drens?

[Mike Javi Cooper]

I thought Mathews specs 13/16 for Drens?

That they do for a fixed rest, TM hunter or Ugly Cookie...

[ccwilder3]

That they do for a fixed rest, TM hunter or Ugly Cookie...

You, Sir, are a Philistine.