Martin cam lean question

[JimGates]

I have a martin jaguar magnum compound bow and I noticed that my top limp is cracked. Then I noticed that the bottom cam looks twisted. I called Martin and they're sending me a set of limbs for free. Do you think the bottom cam is twisted because of the cracked limb, or maybe the axle? Any help would be appriciated.

[rocky]

It could be any or all above, but most likely it is simply limb fatigue caused by load transfer common in single cams.
The new limbs should fix your problem, but to be on the safe side, have the shop install new axles.

[JimGates]

Are there universal axles, or do I have to get them from Martin?

[rocky]

Most diameters are same, but lengths vary.
Your top axle will be longer than bottom on single cam bows.
Probably need to get them from Martin.

[JimGates]

ok thanks

[Azhunter]

Have them send you new axles also. If you can, make sure your cam is not bent. I have seen this happen.

[JimGates]

Cam and axles seem ok. I got the limbs off and gonna sent them back to Martin.