I’ve had this rack for a while & the broken tip on the right G2 has bothered me into doing this fix.
I did a little research and saw the epoxy compound products available & all the YouTube videos but I also have a small pile of sheds that I could get donor antler from.
The pics pretty much tell the story but for some reason I didn’t take pics of the holes I drilled into the antlers pieces and inserted a 1.5” segment of a nail. I used Gorilla glue to bond it & let it dry overnight.
I used a Dremmel to sand down & match diameters. Final touch up with some dark wood stain.
Could also use some sort of filler in the very narrow gap but was concerned the stain would create a dark line across the repaired cross section.
Far from a professional job but I’m happy with it
Thx for looking
I did a little research and saw the epoxy compound products available & all the YouTube videos but I also have a small pile of sheds that I could get donor antler from.
The pics pretty much tell the story but for some reason I didn’t take pics of the holes I drilled into the antlers pieces and inserted a 1.5” segment of a nail. I used Gorilla glue to bond it & let it dry overnight.
I used a Dremmel to sand down & match diameters. Final touch up with some dark wood stain.
Could also use some sort of filler in the very narrow gap but was concerned the stain would create a dark line across the repaired cross section.
Far from a professional job but I’m happy with it
Thx for looking
Comment