Looks great do you have an idea what it it going to weigh?
Announcement
Collapse
No announcement yet.
Live(ish) DIY Flatbed Build
Collapse
X
-
Originally posted by rowdybass View PostMan you’ve got this coming together great. One question though, are you going to have a headache rack and how are you going to mount it?
Yes sir, it will have a headache rack made out of 2.5” square tube. It’s going to be welded to the top of the front toolbox.
Originally posted by twosixteens View PostLooks great do you have an idea what it it going to weigh?
That’s a good question. Looking at weights of the material I purchased, I would guess right around 1000lbs.
Comment
-
Originally posted by rowdybass View PostVery nice, I really like these style of truck beds. How much roughly do you have in material in it ? You’re doing a awesome job on it.
Thank you sir! I’ve got about $1400 in metal, then about another $400 in latches, lights, weather stripping, and other odds and ends.
Comment
-
That’s not bad at all, especially when you look at what they cost from the dealer. I know you have time in it too but at least you know how it was built and you are able to build it exactly how you want it. What color are you going with? My CM bed has rhino liner on the flat part, it is really nice for keeping stuff from sliding around.
Comment
-
Originally posted by rowdybass View PostThat’s not bad at all, especially when you look at what they cost from the dealer. I know you have time in it too but at least you know how it was built and you are able to build it exactly how you want it. What color are you going with? My CM bed has rhino liner on the flat part, it is really nice for keeping stuff from sliding around.
Most likely going to go black. Had several people try to convince me to go white to match the pickup, but I’d like to be able to move it to a future pickup and not be stuck with white.
Comment
-
Originally posted by ramrod View PostTtt
I haven’t forgot about this thread. Haha
Been super busy the last few weeks and haven’t had much time to work on the bed. I’ve gotten everything welded out and cleaned up with a grinder, but not much more progress. Still need to get all the lids made and installed, headache rack, fuel filler bracket, frame mounts, and a few other things. I’ll be out of town Wednesday through Sunday, then I should hopefully be able to get back to work on it after that.
Comment
Comment