That tin is gonna turn colors shortly
Announcement
Collapse
No announcement yet.
Cutting a Propane Tank
Collapse
X
-
The tin situation is gonna get re worked when time allows, this is somewhat temporary because it’s ****in cold. The radiant heat is impressive, still learning the air input, I think we need an adjustable damper, but I allowed for that. So far it has exceeded expectations.
It’s cold out here.
Sent from my iPhone using Tapatalk
Comment
-
Originally posted by Dale Moser View PostI underestimated the heat output when it was 17 degrees...
Things are working well. Just need a few adjustments when we can get a welder out here.
Sent from my iPhone using Tapatalk
Told ya that sucker would get hot!
Sent from my iPhone using Tapatalk Pro
Comment
-
Originally posted by Sackett View PostJust cut a 250 gallon tank to make a fire pit and a big feeder. Don't ever beleive a tank is empty, even when the Guage says it is, lol. Started removing one of the valves and gas was leaking out so decided to remove the whole valve before my wife pulled in the driveway and ignited something. Had a face shield welding gloves and a Arctic gun case between me and the valve. When that valve came off it felt like a horse kicked the gun case into my chest and the valve shot out a hundred yards from where the tank was. Of course our nest camera caught it all on video. Ended up filling it full of water and all was good. I too used a cut off wheel on a grinder, but I drained the tank by drilling a hole on the opposite side of the valve before I cut the tank.
Glad you are ok Russell, that could have turned out pretty nasty.
Comment
Comment