DIY Feeder Funnel (55 gal barrel)

[BowtechKiller]

I also made my own out of galvanized flashing and I even had a factory one for a template but it wasn't very good quality because of the thin metal and it cost me more by the time I bought some tin snips and the flashing. Look at bOSS buck they look to be good quality stamped out of a solid piece and ready to go

[dustoffer]

I don't bother with the funnel--my feeders are crank-ups and once a year, I run them empty, lower them, and dump the dust, bugs, etc. Pound on the bottom a bit to clean 'em good, and good to go for another year.

[kingranch]

Expanding foam sprayed around the inside edge and form it with a piece of cardboard
Ain't purty but works fine and cheap one can will do

[kmitchl]

I've done this for road feeders. It works. Never got to the sophistociation of forming with cardboard. Just shot it in there and trimmed a little when it hardened.

Expanding foam sprayed around the inside edge and form it with a piece of cardboard
Ain't purty but works fine and cheap one can will do

[dragonsdaddy]

Expanding foam sprayed around the inside edge and form it with a piece of cardboard
Ain't purty but works fine and cheap one can will do

that sounds like something this ole cheap ******* can appreciate. got 3 barrels and a can of foam sitting out there just waiting to be used. thanks.