Anyone pulled the headlights with a Ranchhand bumper? Is this an ordeal or not a problem? Is there enough room to remove the headlight assy, with the bumper intact? Mine is a wrap around the headlight bumper.
-
-
Really??? No one has had to replace a headlight bulb on a F250 with Ranchhand bumper? -
I would think as long as you can access the bottom bolt of the headlight it should be able to come out with the bumper in place. The grill has to come off similar to my Ram and ive taken my headlights out easily with a full replacement a couple of times.Comment
-
Thank you KDinTX. Ill give it a shot this weekend. Didn't think it was be too bad just figured someone on here has done it.Comment
-
Looks like it should be easy enough, as long as the guards on the bumper aren't to close to the headlight assembly.Originally posted by brutus View Post
[ame="https://www.youtube.com/watch?v=tjwobWLMaMY"]2011-2016 Ford F-250/F-350/ F-450 Headlight Removal/ Replace/ Repair - YouTube[/ame]Comment
-
What bulbs did you get? Have a 2012 and want to brighten it upComment
-
I have a '15 with a full ranch hand replacement bumper and have done it multiple times (mainly because the LED bulbs I've bought only last 6 months before they quite working) Its a little learning curve the first time, but after that It's easy. You need to take the front cap off the grill first and will need a couple different tools including a long flathead screwdriver to depress and lever the tabs holding the cap on. There are several YouTube videos out there. For the headlight housing screw on the bottom of the lens you will need a thin extension to reach the bolt.Comment
Comment